If it doesn't light, check the other switches/controls connected to. So for a $3, 000 dollar pellet.
Travis industries house of fire.
Travis industries house of fire remote not working. Do not mail your bill of sale to us. If so, there is usually a switch on it labeled on/remote/ off. To receive full warranty coverage, you will need to show evidence of the date you purchased your heater.
If you're trying to troubleshoot that unit, simply remove the batteries from the remote and replace them back in and press the red power button on the 110vac receiver. Sw mukilteo, wa 98275 save your bill of sale. Acumen also makes remote control kits with 110vac receiver boxes.
The remote must be calibrated before it will work (see the instructions on the previous page). Pilot lights, but burner will not light 13 3. Accent light does not operate 26 7.
Plus burning and wasting way more pellets than should be used, ive spent over $1, 200 on pellets, plus over $1, 000 out of pocket to have the 2 original stoves installed and re installed. Return / mailing address 9145 general court plymouth mi 48170 To receive full warranty coverage, you will need to show evidence of the date you purchased your heater.
Secondary burner ( comfort control) does not work 18 5. Sw mukilteo, wa 98275 save your bill of sale. The remote is too far away from your fireplace.
If this occurs when the heater is in remote mode, you will not be able to turn the heater off manually from the battery box. Following these steps will get an acumen remote control to work again. Travis industries house of fire 4800 harbour pointe blvd.
Turned to off for the remote to work correctly. Travis industries 4020812 93508110 features: The remote control system requires the batteries and battery cover to remain in place at all times.
Travis industries is the largest stove, insert, and fireplace company in the united states, producing brands such as lopi, fireplace xtrordinair, avalon, davinci custom fireplaces™ and tempest torch™.each product exemplifies the high quality american craftsmanship that customers have come to recognize. Is there a remote installed on the fireplace? There is no flame modulation 16 4.
Here is why your remote control of travis industries gas fireplace doesn’t function: The batteries of your remote control run out of or are dead. Manual mode use manual mode to turn the heater on and off directly.
We suggest that you attach your bill of sale to this page so that you will have all the 1.8 out of 5 stars. Fan and lights do not operate the first time the appliance is.
Do not mail your bill of sale to us. Return / mailing address 9145 general court plymouth mi 48170 Maybe the remote control receiver is set to off.
Travis industries house of fire careers and employment | indeed.com. Because of the inherent danger involved with gas appliances, all work must be done by qualified personnel only. Delayed ignition on all or part burner 22 6.
The 0.584.028 travis industries proflame gtmfs series transmitter is the remote transmitter that was used for the control room temperature on many gas log sets including direct vent and vent free fireplace manufactured by travis industries. Make sure the wires do not contact the burner or any moving parts. We suggest that you attach your bill of sale to this page so that you will have all the
Now stove number 2 needs to be replaced, which travis industries expects me to eat that cost. If you move the switch to on and the main burner lights, check the batteries in both the remote and the receiver. The 0.584.028 transmitter requires 4.5 dc volts,3 aaa batteries and has a radio frequency of 315 mhz.
Travis industries house of fire 4800 harbour pointe blvd. Disconnect the control cover and pull it forward (leave the wires attached). Sure the wires do not contact the burner or any moving parts.
After that, press any button.