Calefactio carries a tankless water heater valves series,. The valves connect to the tankless water heater with a 3/4 ips female connection.
Service valve kit for tankless water heater:
Tankless water heater service valves. It replaces up to 18 fittings and 16 connections used in typical tankless water heater installations. You would need a five gallon bucket, two washer hoses, 2 gallons of vinegar and a small pump. Includes residential pressure relief valve (150 psi/500,000 btu/hr)
Manufacturers call it an “isolator valve kit” or “service valve kit,” and plumbers often just say “flush kit.” it’s a set of four valves, two each on the hot and cold water pipes below a tankless water heater, that enables you or a service person to. Hook the hoses up to the ports, turn the gas off on the water heater and pump the solution into the water heater on the cold and back into the bucket from the hot. The tankless water heater service valve kit replaces up to 18 fittings and 16 connections used in typical tankless water.
3/4 inch tankless water heater service valve kit w/ relief valve for rheem,rinai. Then you can simply hook up some hoses to the in and out ports on the service valves and pump vinegar or some acidic solution though the tankless. Iflow has designed this service kit to facilitate a.
The iflow ezee 3/4 tankless water heater service valve kit works with all tankless. 5 out of 5 stars. Lead free isolation valves & pressure relief valve.
The complete instructions would be: Ips service valves, 24 in. Cleaning your tankless requires you to shut the fuel source down, unplug the unit, switch the incoming and outgoing water over with the service valves.
Tankless water heater valve kit: Tankless service valves allow for easy maintenance and installation of your tankless water heater to your household water supply. The tankless water heater service valve kit by eastman is used to stop the water supply to a tankless water heater, isolating the unit so it can be serviced.
Gas connector (290,900 btu) and pr valve This 3/4 inch gen ii tankless water heater service valve with versafit ™ technology is designed to simplify the installation and maintenance of tankless water heaters. Fill the bucket with the vinegar and the rest of the way with water.
This lead free brass made 4444 series valve set has hot and cold set of full port forged brass ball valves, hi flow hose drain, pressure relief valve outlet and adjustable packing gland so this valve set is essential for servicing your tankless unit. Drain down the water in the system by opening a few faucets, then turn everything off, disconnect the washing machine, make a solution of water and vinegar in a bucket, put the pump in the bucket. The pressure relief valve is to help protect the unit and release if the pressure in the tankless water heater or hot water system exceeds 150 psi and greater than 200,000 btus.
Lead free certification (nsf/ansi 372) no teflon tape required on connections to tankless. 7 rows tankless water heater valves. Tankless water heater service valve kit.
Hot & cold set of full port forged brass ball valves. Please refer to the water heater’s owners manual for manufacturer’s specific testing instructions and recommendations. Includes 3/4, 150 psig, 200mbh pressure relief valve.
Training in installation of tankless water heaters. The 9007778005 lead free isolation valves & pressure relief valves are used to isolate a unit for service. Diagnostic testing on the tankless water heater can be performed using the drain valve featured on the service valves.
Turn the water off to the house, turn the water heater off, at least the gas valve. Webstone ips isolator exp e2 tankless water heater service valve kit makes life easy for tank less water heater unit owners. It may take several attempts to light the pilot.